Best Tips for Crafting Resin Jewelry at Home
Interested in crafting resin jewelry at home? It’s a fun and creative project, as long as you know what to do and what to avoid.

Resin jewelry has become more popular recently, and it’s easy to see why, it’s colorful, durable, and unique.
We’ll guide you through each step of the process, helping you avoid common mistakes and make the most of your time and effort.
Tips for Crafting Resin Jewelry at Home
Resin jewelry is any jewelry made with resin, with pendants and earrings being the most popular types.
When items like flowers, glitter, beads, or gemstones are trapped inside the resin, it’s called casting. Resin can also be used to cover other materials, like wood or illustrations, to protect them.
Here are the tips for crafting resin jewelry at home;
1. Get the Necessary Supplies You Need

Before starting your resin jewelry project, gather all the necessary materials. Use two-part epoxy resin, it’s safe, durable, and works well for coloring and intricate designs. You’ll need clean mixing containers, stir sticks, and molds or bezels to shape your jewelry.
Wear gloves to protect your skin, and consider safety gear like an apron, goggles, and an N95 mask, especially if your workspace isn’t well-ventilated. Cover your surfaces with plastic to avoid messy spills, and have a heat gun or torch handy to eliminate air bubbles.
If you want to add color, use resin-safe dyes or pigments, and feel free to incorporate decorative items like shells or flowers.
For finishing touches, have jewelry components like chains or hooks ready. Take your time and follow safety guidelines for a smooth crafting experience.
2. Get Your Resin Jewelry Workspace Ready

Pick a spot for your project where you can control the temperature, ideally between 75°F and 80°F, as epoxy resin cures best in this range.
Protect your floor and surfaces with plastic to catch any spills, if there are none, you can reuse the plastic later.
Arrange all your supplies within easy reach but out of your way. Ensure to put on your gloves and any other protective gear like a mask or goggles.
Before you start, double-check that you have everything you need and ensure your workspace is clean and free of dust to keep the resin clear and smooth.
3. Ensure to Mix your First Resin Batch

To mix your epoxy, prepare just enough for the first layer, about half of what you’ll need for the whole project.
Start by adding the hardener, then the resin, following the proportions specified by your brand. For example, with a 1:2 ratio, mix 4 oz of hardener with 8 oz of resin for a 12 oz batch.
If you want to add color, mix in a tiny amount of dye or pigment gradually until it looks right, as too much can make the resin too dark.
Stir thoroughly according to the instructions to ensure the epoxy is properly mixed and ready for use.
4. Pour Your First Epoxy Layer

Once your epoxy is mixed, pour it immediately, as it has a limited working time, about 20 minutes for UltraClear Deep Pour Epoxy. Fill each mold or bezel halfway, being careful not to overfill, since you’ll add the rest later.
If you’re adding decorative items, gently place them in the resin now, ensuring they don’t stick out or shift to the edges.
Use tools like tweezers to adjust their position if needed. Remove air bubbles by briefly passing a heat gun or torch over the resin without letting the flame touch it.
Wait a few minutes and repeat if new bubbles appear. Allow the first layer to partially cure for about four hours before moving on to the next step.
5. Mix and Pour Your Second Layer

Now it’s time to add the second layer of epoxy to finish your project. Mix a fresh batch of resin, following the same process as before.
Carefully pour it over the first layer until the mold or bezel is completely filled. Use a heat gun or torch to get rid of any air bubbles, just like you did with the first layer.
Wait a few minutes, then go over it again to remove any bubbles that are still there.
To ensure the resin is clear and smooth, check at eye level for any hidden bubbles before letting it fully cure.
6. You Allow the Resin to Cure

The time it takes for epoxy resin to fully cure depends on the brand and type of resin you’re using.
For UltraClear Art & Craft Epoxy and UltraClear Deep Pour Epoxy, the resin needs a full 72 hours to completely harden and reach its maximum strength and clarity.
However, if you’re eager to see your work, you can gently remove the piece from the mold after about 24 hours, as the resin will be firm enough to handle.
Be cautious during this step to avoid bending or damaging the piece, as it won’t be fully cured yet. Allow the resin to continue curing outside the mold for the remaining time to ensure it sets properly.
7. Finishing Your Jewelry Pieces

The step depends on the kind of jewelry you’re making. For a necklace, use jewelry pliers to attach your resin piece to a chain with a jump ring.
For earrings, connect the resin pieces to hooks using memory wire for a stylish set.
Whatever you’re crafting, your resin is now ready for assembly. If you’ve followed all the steps, you’ve created your own unique resin jewelry.
Resin art is a versatile medium that goes beyond the basics and can be used for many creative projects.
Not all resin is the same, so it’s important to read the label to find the right type for what you’re making.
Resin is great for creating unique, one-of-a-kind pieces that push your artistic limits. We hope these resin jewelry tips inspire you and encourage you to start your own resin journey.